http://hce.halomaps.org/index.cfm?fid=5470


A bit better.

not really.
Edited by Sergeant 1337 on Nov 13, 2010 at 02:25 PM

Well, at least this one has a proper skin. If you squint really hard, and step away from the screen, it.... kinda looks good.

I've seen this one b4 and its truly terrible lolz the model I have is good but theres no skin :(

Speaking of no skin, I was watching one of the vids, and I noticed something that looked like a sniper mod of the Battle Rifle. What was that?

the skin isnt good either. it looks like they just used a side ref of dmr and put on the model and uvw unwrapped it. or photoshopped. either way its bad.

if you're refering to the red and white looking rifle that is the completely custom from scratch Blitzkrieg sniper rifle. Even the sounds are custom. If you get a close look at it, it looks nothing like a BR

if you're refering to the red and white looking rifle that is the completely custom from scratch Blitzkrieg sniper rifle. Even the sounds are custom. If you get a close look at it, it looks nothing like a BR

Thanks! :D Teekie worked really hard on the model and I did the best I could on tags, sounds, animations. I just wish it had a better uvw unwrap. The texture is detailed its just not uvw unwrapped very well :(

teh sadface
Edited by DA_Ender on Nov 14, 2010 at 04:15 AM

did you happen to get that better looking ccs cruiser from CAG Gonzo?

well since nobody is likely to just give this guy a dmr model he doesn't really have a choice does he

Well actually I have had a DMR and AR model donated. They need to be skinned still. This guy doesn't want or need a DMR model from anybody else. The amount of tags that have been flying at me from all directions is kind of scary and tons of people have donated items.. I AM still in need of a skin for the DMR so if anyone is out there with a decent skin hit me up with a PM. The Reach AR that I volunteered to finish is extremely accurate, but it also needs a skin. Shove it bro. No need to talk down to anyone. Don't bring your troll BS here I WILL NOT HAVE MY TOPIC LOCKED BECAUSE OF YOU BEING RUDE. If you have something negative to say, go somewhere else and gtfo my topic.



His isn't any better looking, and it's not a cruiser. It's a rip of my Flagship model from Extinction (he said so right in his thread) obtained by BSP converter. Technically, the flagship WAS a carrier that had major changes made to it and I still have the source files.

Good news is that as of a few days ago, I have the Halo 3 CCS BattleCruiser, and the Halo 3 Assault Carrier that will be featured in Genocide and Contamination as the replacement for the crappy Cruiser and Halo 2 Carrier. I'm also working on a Halo 3 Pelican that will have a chaingun and missile pods, and the Halo 3 Phantom. The Halo 3 Scorpion has also been added to replace the archaic Combat Evolved textures.









Edited by DA_Ender on Nov 15, 2010 at 12:20 PM

Z0mg that cruiser and pelican are hawt.
Hit me up on Xfire and I could fix the shaders for both if you want.
Edited by MoooseGuy on Nov 15, 2010 at 12:42 PM

Yeah the ships don't take to fog too well. They look fine in Genocide, and Contamination, but any dark coloured fog makes them look faded. I am not at home atm, but when I'm back I will send teh shaders over if you would like to fix their fog failness :D

sorry but read the avatar quote. you're all uppity over nothing.

this is really simple. there's no completed dmr tags released, and the guy wants a dmr. you have a model. those aren't tags, those are models (do you understand the difference?). the only dmr tags available at the moment are in that map. therefore, he has no other option than to get the tags from that map.

is it really that hard to put two and two together? seriously?

also, I'd say you're being much more "rude" than I've been in this topic. in that single post of yours you've told me to "shove it bro," "gtfo" and to not bring my "troll bs" (aka basic logic) into this thread... real polite, and not hypocritical at all
Edited by HaloIsAHorribleGane on Nov 15, 2010 at 01:43 PM

Both my DMR and AR are ingame as completed weapon tags. They are merely unskinned and need custom HUD's. No they were not released anywhere because I got them from the source author. I had a choice of THREE DIFFERENT DMR's and I chose the one you seen in the video to be the one that I improve. As for you. You think you're smarter than everyone else, and I have seen you needlessly flame in many other topics (one was a good friend's topic) that resulted in them getting locked. You are opinionated and feel that you are correct about everything you say. Yes I am "uppity". Don't mess with my friends. You have been slightly rude by assuming that you know more than I do about the DMR that I am working on, and I refuse to let it eslcalate to a point where Dennis feels he needs to lock my topic to shut you up. Take your "basic logic" elsewhere or remove your stuck up attitude that I have seen countless times in other topics. Sorry if this comes of as impolite but I tell it as it is.
Edited by DA_Ender on Nov 15, 2010 at 01:53 PM

^ This.
So much truth. So much win.

oh so it's not released? then as I've said before he doesn't really have a choice does he

see how basic logic works? you should try it some time. or did you just not at all understand the point of my post and reply in a fit of rage because you have some awkward grudge against me
Edited by HaloIsAHorribleGane on Nov 15, 2010 at 02:17 PM

Get out of this thread please, I have also seen you trolling other threads, and I as well as Ender and most people would rather not see this thread get locked because you feel the need to act like an idiot.

Also, don't claim in any way to know more about someones map than they do, it goes against that basic logic that you supposedly use.
Edited by Bobblehob on Nov 15, 2010 at 02:18 PM

did I miss something when did that happen

Hmm, I wonder, how about when you said there was no way for him to have complete DMR tags in the map?


Edited by Bobblehob on Nov 15, 2010 at 02:35 PM
Edited by Bobblehob on Nov 15, 2010 at 02:37 PM

Or when he said I didn't have a choice of DMR's? There are released ones in unprotected maps and they suck. At any rate, I have made my point and this arguement is done.

Please someone, anyone, PLEASE I needz teh skinz for the AR and DMR! someone out there must have them!
Edited by DA_Ender on Nov 15, 2010 at 03:32 PM

how is that me telling him I know more about his map than he does

you don't even know what you're arguing about anymore



due to the person your quoting not knowing what they're arguing about, neither do you.

Will teh ripped beta skinz work?

Yeah they do work but they look like dogballs. I am really hoping that someone has the actual texture kickin around somewhere that they would be willing to share. If not, I can use existing H2/H3 textures, but it won't look as good or be accurate :(

The Reach AR that you said as donated... are you talkin about mine?

Also will the back door for the halo 3 pelican be able to open?

Yeah it's the model you made man! (it's teh awesome btw very accurate)

and yeah I want the back door to the pelican to open when you press cntl (it will be linked to the engine hack function as an animation) or I can have it open when you get close to the ground (suspension animation) working in the same way that the landing gear does.

Which way do you guys think is better?

I say the ctrl way cuz it would be cool to walk around the pelican while its flying

That is impossible as Halo's super awesome physics engine says that if you're not seated you fly out even right through the collision model once you hit even just a little speed :(

Bungie corrected this retardedness in Halo 2.
Edited by DA_Ender on Nov 15, 2010 at 06:07 PM

these maps look good. when will they b released.

Well assuming all goes well during beta testing and I don't encounter any more of my favorite thing ever (exceptions) then it should be out before christmas.

I know! Make a seat that has you standing up in the troop bay and cockpit like the longsword :D

Good idea??

Yes?

No?

Yeah man I had fully intended to do that :D I did the same thing with teh Scarab.

alright cool

Another idea: Make collision for the covenant and human space ship scenery and for the assault carrier, you should put covenant air vehicles in there. That would be tight!

another thing, use the actual sounds for the halo 3 pelican and make it faster
Edited by Sergeant 1337 on Nov 15, 2010 at 07:32 PM

If you put air vehicles in something in the air, how will they reach them then?